Buy More & Save Big!

How to Use Your Wave Activator Spray

Step 1: PREP

Start with freshly washed, damp hair that's been gently towel-blotted. Your hair should feel moist but not dripping wet—like a wrung-out sponge.

This moisture level lets the Wave Activator Spray distribute evenly and penetrate your hair strands.

If your hair is too wet, the product slides off. If too dry, it won't have enough moisture to enhance your natural wave pattern.

Step 2: SPRAY

Hold your bottle 8-10 inches away from your hair—about ruler length. This distance ensures even coverage without oversaturating.

Focus on mid-lengths to ends where waves naturally form, avoiding roots to prevent flatness. The amount depends on your hair length and thickness (see our guide below for specifics).

Remember: you can always add more, but removing excess is harder.

Step 3: SCRUNCH

Here's where the magic happens! Cup sections of hair in your palms and gently scrunch upward toward your scalp.

Start from the ends and work up, encouraging your natural wave pattern to form. This motion helps the spray activate while coaxing your hair into beautiful wave clumps.

Don't be gentle—your waves need this encouragement to reach their full potential.

Step 4: DRY & FINISH

Let your waves set completely by air-drying (gentler, takes longer) or diffusing on low heat (faster). If diffusing, hover around your hair without touching to avoid disturbing the wave pattern.

Once completely dry—not just mostly dry—gently scrunch out any stiffness or "crunch."

This final scrunch leaves you with soft, touchable waves that move naturally.

Amounts by Hair Length

Instant Fixes

If You Notice: Slight stiffness after drying

What’s Happening: Your waves are just setting!
Simple Tweak: Scrunch gently when completely dry - they'll soften beautifully

If You Notice: Waves could be more defined

What’s Happening: They just need a little encouragement
Simple Tweak: Add the scrunching step - your waves will thank you

If You Notice: Frizz on humid days

What’s Happening: Your waves need extra protection
Simple Tweak: Add a pea-size curl cream after spraying - game changer!

⚡ Most customers see better results by Day 3 when they follow their hair type guide

Using Your Wave Activator Spray in Every Situation

Advanced techniques for complex challenges your waves might face.

SEVERE HUMIDITY (80%+ HUMIDITY)

When your basic curl cream addition isn't enough, you need a layered approach.

Apply your Wave Activator Spray using your normal technique, then layer with both a leave-in conditioner AND a light gel.

The key is proper layering: spray first, then leave-in using praying hands technique, then gel scrunched in sections.

Make sure each layer is fully distributed before adding the next to prevent product buildup or conflict.

DRY, WINDY CONDITIONS

Your waves need extra moisture retention in these conditions.

Apply Wave Activator Spray to hair that's slightly more damp than your usual technique, then immediately follow with a small amount of oil or serum applied only to the outer layer of your hair.

This creates a protective barrier against moisture-stripping wind while allowing your waves to maintain their natural movement.

SEASONAL HAIR TRANSITIONS

As weather changes throughout the year, your hair's needs change too.

Summer-to-fall transitions often require switching your focus from humidity protection to moisture retention.

Winter-to-spring means gradually reducing heavy protective products as natural humidity returns to the air.

Adjust your Wave Activator Spray routine accordingly—you may need less product in humid seasons and more in dry ones.

Making Your Waves Last Multiple Days

The Goal: Extending your waves beyond the typical day 2-3 refresh into a full week of great hair days without daily washing or complete restyling.

Days 1-2: Foundation Phase

Use your normal Wave Activator Spray routine following your hair type guidelines. The key to longevity starts with proper initial application.

Sleep with your hair in a loose top knot or use medusa clipping techniques to preserve wave structure overnight without creating dents or flattening.

Days 3-4: Strategic Refresh Phase

This is where technique matters most. Apply Wave Activator Spray plus leave-in conditioner, but only to the sections that actually need refreshing.

Leave well-behaved sections completely untouched to avoid over-manipulation.

Focus your refresh efforts on areas that tend to lose definition first—usually around the face, crown, and wherever you sleep.

Days 5-7: Spot Treatment Phase

Switch to targeted application rather than all-over refreshing. Use Wave Activator Spray on individual problem sections only, focusing on areas around your face and crown that tend to lose definition first.

Most people develop consistent "problem zones"—learn yours and target them with preventive spray application.

Advanced Strategy: Map your hair's individual behavior patterns over several weeks. Understanding which areas lose definition first allows you to proactively treat those zones and extend your overall wave longevity.

Using Wave Activator Spray with Your Other Products

Working with Leave-in Conditioners

Proper Order: Apply leave-in conditioner first to damp hair, focusing on mid-lengths and ends. Then apply Wave Activator Spray over the leave-in using your normal technique.
The spray helps activate and set whatever moisture the leave-in provides, while the leave-in gives the spray more slip and prevents any potential stiffness.

Combining with Styling Gels

Layering Technique: Wave Activator Spray always goes on first as your base layer. Allow it to be absorbed for 30-60 seconds, then apply gel using praying hands or scrunching in sections.
Never mix the products directly in your hands—always layer them with intention. The spray provides flexible hold while the gel adds stronger definition and frizz control.

Heat Protectant Integration

Application Sequence: Heat protectant goes on damp hair first, followed by Wave Activator Spray, then proceed with diffusing or other heat styling.
The spray actually works better when it's the last product applied before heat styling, as it helps set your wave pattern while the heat activates its hold properties.

⚠️ Troubleshooting Product Conflicts

If you notice buildup, products seeming to "cancel each other out," or your hair feeling coated, reduce the amount of one or both products rather than eliminating either completely.
Sometimes the issue is quantity, not compatibility. Start with half your usual amount of each product and gradually increase until you find the sweet spot.

Still Not Getting the Results You Want?

If you're still struggling, your hair type might need these specific adjustments.

If You Have Straight Hair (1A-1C)

Your Reality:

Your hair naturally wants to be straight, so the Wave Activator Spray works best when you give it some texture to enhance first.
The spray can't create waves from nothing, but it's excellent at defining and holding whatever wave pattern you create through braiding, twisting, or scrunching techniques.

Your Method:

1

Start by creating temporary waves with braids, twists, or scrunches while your hair is damp from washing.

2

Apply 3-4 light mists from 8-10 inches away, focusing specifically on the areas where you've created bends or waves.

3

Gently scrunch the sprayed sections to help the product work with the texture you've created.

4

Air-dry or diffuse on low heat to set the waves without disturbing your created pattern.

If You Have Wavy Hair (2A-2B) Sweet Spot

Your Reality:

You're exactly who this spray was designed for! Your natural wave pattern just needs enhancement and definition.
Your hair has the perfect amount of natural texture to work with the spray's formula, creating beautiful results without fighting against your hair's natural tendencies.

Your Method:

1

Start with freshly washed, damp hair that's been gently towel-blotted to remove excess water.

2

Apply 4-6 mists to damp hair from 8-10 inches away. For 2A hair, use less product and completely avoid roots. For 2B hair, you can handle slightly more product throughout.

3

Scrunch upward in sections to encourage your existing waves and help them clump together.

4

Air-dry for 2A hair, or diffuse for 2B hair which helps set waves more permanently.

If You Have Defined Waves (2C)

Your Reality:

Your waves have strong personality and can handle more product and heat.
Your hair sits at the border between wavy and curly, with naturally more defined S-patterns that are prone to frizz but also capable of stunning definition when styled correctly.
Your waves need more encouragement and support than looser wave patterns.

Your Method:

1

Start with freshly washed, damp hair, ensuring it's well-detangled to prevent disrupting your natural wave pattern.

2

Apply 6-8 confident mists while your hair is damp, really working the product through each section from mid-lengths to ends.

3

Scrunch with intention—your waves need firm, confident scrunching to encourage maximum definition and clumping.

4

Diffuse on medium heat to lock in the definition and prevent your waves from falling out as they dry. On humid days, consider adding a small amount of gel or cream over the spray before drying.

If You Have Curly Waves (3A)

Your Reality:

Your hair sits at the intersection of wavy and curly, which means the Wave Activator Spray works best as either a primer or a refresher rather than your main styling product.
Your curls have enough definition to need heavier products for wash days, but the spray excels at refreshing and reactivating your curl pattern between washes.

Your Method:

1

For wash days, start with damp hair before applying your regular styling routine. For refresh days, lightly dampen sections that need reviving.

2

Apply 4-6 mists to damp hair on wash days as a foundation layer, or 2-4 light mists on refresh days focusing on mid-lengths to ends.

3

Scrunch gently to reactivate your curl pattern, being careful not to disrupt already-formed curls on refresh days.

4

On wash days, immediately layer your regular cream and gel routine. On refresh days, air-dry or use minimal diffusing to avoid over-manipulation.

If You Have Tight Curls & Coils (3B-4C)

Your Reality:

Your beautiful curl pattern is already well-defined, so the Wave Activator Spray serves as a gentle refresher and softener rather than a primary styler.
Your curls need heavier, more moisturizing products for main styling, but the spray excels at day 3-4 refreshing when your curls need a gentle pick-me-up without fully restyling.

Your Method:

1

Start with day 2-4 hair that needs refreshing. Focus only on sections that look dull or have lost definition.

2

Apply 3-5 very light mists from 10+ inches away, focusing exclusively on mid-lengths to ends where your curls may need a moisture boost.

3

Gently scrunch or rake through with your fingers, being extremely careful not to disrupt your curl pattern.

4

Immediately follow with your favorite leave-in conditioner or cream while the spray is still damp to seal in benefits and prevent any potential dryness.

Success Checklist

Before you fall out of love, check:

Using Wave Activator Spray 8-10 inches away
Scrunching after application
Hair completely dry before final scrunch
Right amounts for hair length
Tried humidity protocol if needed
Consider if Wave Revival Shampoo needed for buildup
Consider if Curl Restoration Conditioner needed for moisture

Need More Help?

Join 50,000+ happy Bounce users!

⭐️⭐️⭐⭐️️⭐ ️4.8 (14,283 Reviews)

Contact us with:

Hair type & length
Which Bounce products you're using
Current routine
Specific concerns

24/7 Support

Your waves are beautiful - our complete system helps you see it! 💕

The Complete Bounce Wave System Guide

The Complete Bounce Wave System Guide

How to Use Your Wave Activator Spray

Instant Fixes

Using Your Wave Activator Spray in Every Situation

Making Your Waves Last Multiple Days

Using Wave Activator Spray with Your Other Products

Still Not Getting the Results You Want?

Your Reality:

Your Method:

Your Reality:

Your Method:

Your Reality:

Your Method:

Your Reality:

Your Method:

Your Reality:

Your Method: